Skip to end of banner
Go to start of banner

Agent integration in the image creation

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Instructions :

The only thing to pay attention is the configuration file of the provconnect agent on the new image that is going to be installed on the device.  The installation file is located here per default : “C:\Program Files (x86)\ProVConnect\ProVConnect Device Agent\Device Agent\bin\Wanpulse.config” 

Please follow the following steps :

  1. Make sure that the Server communication URL is properly configured :  <add key=”Communication.Url” value=”https://MYSERVERURL:443” /> It will ensure that the agent will be able to communicate with the server 
  2. Remove the following line if possible <add key=”Agent.Last.Identity” value=”Device_SID&DeviceMacAddresses” /> It will make the identification of the devices easier for the server
  • No labels