Installing software
Step 1: select the install app menu
for installing software with proVconnect, you need to go to "manage applications" sub menu in the "image management" main menu of the command list
Step 2: define where the installer is located
You then need to select where the application is stored. you have to options
- Upload from the library: in this case you need to previously upload the application file (exe or msi) in the library, then select this option and look for the file in the library
- Upload from a network path: you need to specify where the exe or msi file is located
Option 1: Upload from the library
option 2: Upload from a network path
Step 3: enter the right silent mode parameters
This step is critical to make sure that the application will install in silent mode and will not require local user to validate. it is necessary to check with the application editor what are the right silent mode parameters.
Slilent mode parameter can be case sensitive. a particular attention needs to be required in entering these parameters.
Some application need to also be installed with a config file. in this case, it it necesseary to preceed the installation command by an upload config file command
exemple 1:
exemple 2
Step 4: publish the task on the selected devices